Techcore Oil Tools Co.,Ltd,
Professional Provider & Manufacture of DST tools, Coiled Tubing Tools & Wireline Tools
Add to Cart
Oil Well Fishing Tools Venturi Junk Basket Coiled Tubing Tools
Brief of Venturi Junk Basket
The Venturi junk basket is a kind of fishing tools applied for the coiled tubing fishing operation. The venturi junk basket is used to salvage debris in the well. When pumping the fluid, the fluid forms in the venturi cavity of the tool once the fluid flows out of the fishing basket nozzle, a vacuum is
created. The fluid carrying debris is sucked from the bottom of the tool. The fluid carrying the debris passes through the internal filter of the tool. The venturi cavity circulates again, and the debris remains in the chip holder inside the tool and is carried to the ground with the tool.
Features of Venturi Junk Basket
* The venturi junk basket is essentially a high-powered vacuum cleaner
* The venturi junk basket is used with fluid, multiphase fluids, foams, or gases.
* The nozzles in the venturi junk basket are simply changed out as per the pump rate, fluid or gas.
* A debris filter screen is placed before the Venturi chamber to prevent debris from blocking the Venturi tubes.
Technical parameter of Venturi Junk Basket
| Size | OD | ID | Service | Top Connection | Operating Pressure | Min Temp Rating | Max Temp Rating |
| 1 3/4” | 1.75” | 0.469” | STD | 1” AMMT Box | 5,000 PSI | 0°F | 350°F |
| 2 1/16” | 2.062” | 1” | STD | 1 1/2” AMMT Box | 5,000 PSI | 0°F | 350°F |
| 2 1/4” | 2.062” | 1” | STD | 1 1/2” AMMT Box | 5,000 PSI | 0°F | 350°F |
| 2 5/8” | 2.625” | 1” | STD | 1 1/2” AMMT Box | 5,000 PSI | 0°F | 350°F |
| 3 1/8” | 3.125” | 1” | STD | 2 3/8” PAC Pin | 5,000 PSI | 0°F | 350°F |
| 3 1/8” | 3.125” | 1” | STD | 2 3/8” REG Box | 5,000 PSI | 0°F | 350°F |
Service of Techcore Oil Tools
Techcore Oil Tools expertise in manufacture of the Drill Stem Testing Tools for more than Ten years, the professional Reserch and Development (R&D) department improves the advanced technology in design of the Drill stem testing tools for well testing service.
Strict quality control system
Techcore oil tools is certified by ISO, all the manufacture is strictly conformed with ISO system including Quality Control Management, Environmental Management and Occupational Health & Safety Management. For each downhole tools and each parts, we make the trace-ability from the raw material till the products. And any TPI inspection are available with us from SGS/BV/ TUV /DNV etc..
Continuous after sales service
Techcore provides the prompt after-sales service to our customers to guarantee your benefits. For the complete downhole tools, we provide the free training in our factory, and if you need the site instruction, we can appoint our technical engineer to your site for the training.
Welcome to contact us to learn more information about coiled tubing tools!!
The Coiled Tubing tools we manufactured include Double slip connector, roll on connector, roll on x thread connector, double flapper check valve, motor head, dual function circulating valve, hydraulic jar, fishing tools etc.