Techcore Oil Tools Co.,Ltd,
Professional Provider & Manufacture of DST tools, Coiled Tubing Tools & Wireline Tools
Add to Cart
Oilfield Wellhead Wireline Pressure Control Equipment Oil Well & Gas Well WPCE
Wellhead Wireline Pressure Control Equipment is used for testing and paraffin treatment in flowing oil well, gas well, water injection well and coalbed methane testing. The unit supplies buffer and transitional area for string running with pressure to hole, could satisfy the wellhead seal requirement and there is no overflow. Simple operating, safe and reliable function. Working pressure is 10MPa, 21MPa, 35MPa, 70MPa and 105MPa. Standard ID is 30mm, 52mm, 62mm(65mm), 76mm(78mm), 89mm, 102mm(103mm), 120mm, 140mm, 160mm and 180mm. Our factory has the ability to design products to adapt to different environment according to clients ' requirements.
Specification of WPCE - Wireline Pressure Control Equipment
| Model | DLFP3-10 | DLFP3-21 | DLFP5-21 | DLFP6-35 | DLFP7-35 | DLFP8-35 | DLFP10-35 |
| Working Pressure Mpa | 10 | 21 | 21 | 35 | 35 | 35 | 35 |
| Lubricator ID mm | 32 | 32 | 52 | 62(65) | 76(78) | 89 | 102(103) |
| Cable ID mm | 5.6mm/8mm/11.8mm/12.7mm | ||||||
| Sealing Mode | Grease Injection sealing + rubber element sealing+stuffing | ||||||
| Service | Water, Crude oil, Natural gas with H2S and CO2 | ||||||
| Working Temperature | T-20(-29oC~+121oC) | ||||||
| Model | DLFP12-35 | DLFP16-35 | DLFP18-35 | DLFP22-35 | DLFP6-70 | DLFP7-70 | DLFP8-70 |
| Working Pressure Mpa | 35 | 35 | 35 | 35 | 70 | 70 | 70 |
| Lubricator ID mm | 120 | 140 | 160 | 180 | 220 | 62(65) | 76(78) |
| Cable ID mm | 5.6mm/8mm/11.8mm/12.7mm | ||||||
| Sealing Mode | Grease Injection sealing + rubber element sealing+stuffing | ||||||
| Service | Water, Crude oil, Natural gas with H2S and CO2 | ||||||
| Working Temperature | T-20(-29oC~+121oC) | ||||||
| Model | DLFP10-70 | DLFP12-70 | DLFP14-70 | DLFP16-70 | DLFP18-70 | DLFP7-105 | DLFP12-105 |
| Working Pressure Mpa | 70 | 70 | 70 | 70 | 70 | 105 | 105 |
| Lubricator ID mm | 102(103) | 120 | 140 | 160 | 180 | 76(78) | 120 |
| Cable ID mm | 5.6mm/8mm/11.8mm/12.7mm | ||||||
| Sealing Mode | Grease Injection sealing + rubber element sealing+stuffing | ||||||
| Service | Water, Crude oil, Natural gas with H2S and CO2 | ||||||
| Working Temperature | T-20(-29oC~+121oC) | ||||||
| Model | DLFP12-35 | DLFP16-35 | DLFP18-35 | DLFP22-35 | DLFP6-70 | DLFP7-70 | DLFP8-70 |
| Working Pressure Mpa | 35 | 35 | 35 | 35 | 70 | 70 | 70 |
| Lubricator ID mm | 120 | 140 | 160 | 180 | 220 | 62(65) | 76(78) |
| Cable ID mm | 5.6mm/8mm/11.8mm/12.7mm | ||||||
| Sealing Mode | Grease Injection sealing + rubber element sealing+stuffing | ||||||
| Service | Water, Crude oil, Natural gas with H2S and CO2 | ||||||
| Working Temperature | T-20(-29oC~+121oC) | ||||||
About Techore Oil Tools
With the professional Research and Development (R&D) department and skilled engineers whom were committed to the design of downhole tools for more than ten years, Techcore Oil Tools equipped with advance equipment is specialized in manufacture the oil downhole tools and its related parts in high quality.
Techcore oil tools is certified by ISO, all the manufacture is strictly conformed with ISO system including Quality Control Management, Environmental Management and Occupational Health & Safety Management. For each downhole tools and each parts, we make the trace-ability from the raw material till the products. And any TPI inspection are available with us from SGS/BV/ TUV /DNV etc..
Welcome to contact us for information about the downhole tools